Emerson Series 3000 MVD User Manual
78
Micro Motion
®
Series 3000 MVD Transmitters and Controllers
Configuring the Petroleum Measurement Application
9.4.2
Temperature data
For the temperature value to be used in CTL calculation, you can use the temperature data from the
sensor, or you can poll an external temperature device:
sensor, or you can poll an external temperature device:
•
To use temperature data from the sensor, no action is required.
•
To poll an external temperature device, configure polling for temperature as described in
Section 7.6. When polling is enabled, the Series 3000 device will automatically use the
external temperature value for CTL calculation.
Section 7.6. When polling is enabled, the Series 3000 device will automatically use the
external temperature value for CTL calculation.