Emerson MMI-20016185 User Manual
Safety and approval information
This Micro Motion product complies with all applicable European directives when properly installed in accordance with the instructions in this manual.
Refer to the EC declaration of conformity for directives that apply to this product. The EC declaration of conformity, with all applicable European directives,
and the complete ATEX Installation Drawings and Instructions are available on the internet at www.micromotion.com/atex or through your local Micro Motion
support center.
Refer to the EC declaration of conformity for directives that apply to this product. The EC declaration of conformity, with all applicable European directives,
and the complete ATEX Installation Drawings and Instructions are available on the internet at www.micromotion.com/atex or through your local Micro Motion
support center.
For intrinsically safe installations, use this manual with the appropriate UL-D-IS and CSA-D-IS Installation Instructions available on the internet at
www.micromotion.com/documentation
www.micromotion.com/documentation
or through your local Micro Motion support center.
Information affixed to equipment that complies with the Pressure Equipment Directive can be found on the internet at www.micromotion.com/documentation.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the transmitter configuration manual. Product
data sheets and manuals are available from the Micro Motion web site at www.micromotion.com/documentation.
data sheets and manuals are available from the Micro Motion web site at www.micromotion.com/documentation.
Return policy
Micro Motion procedures must be followed when returning equipment. These procedures ensure legal compliance with government transportation agencies
and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion procedures will result in your equipment
being refused delivery.
and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion procedures will result in your equipment
being refused delivery.
Information on return procedures and forms is available on our web support system at www.micromotion.com, or by phoning the Micro Motion Customer
Service department.
Service department.
Micro Motion customer service
Location
Telephone number
U.S.A.
800-522-MASS (800-522-6277) (toll free)
Canada and Latin America
+1 303-527-5200 (U.S.A.)
Japan
3 5769-6803
Asia
All other locations
+65 6777-8211 (Singapore)
U.K.
0870 240 1978 (toll-free)
Europe
All other locations
+31 (0) 318 495 555 (The Netherlands)
Customers outside the U.S.A. can also send an email to
flow.support@emerson.com
.
Copyrights and trademarks
© 2010 Micro Motion, Inc. All rights reserved. The Micro Motion and Emerson logos are trademarks and service marks of Emerson Electric Co. Micro Motion,
ELITE, MVD, ProLink, MVD Direct Connect, and PlantWeb are marks of one of the Emerson Process Management family of companies. All other trademarks
are property of their respective owners.
ELITE, MVD, ProLink, MVD Direct Connect, and PlantWeb are marks of one of the Emerson Process Management family of companies. All other trademarks
are property of their respective owners.