A.O. Smith TJ-80A Leaflet
Page 1 of 2
Revised August 2008
AOSTT35100
Commercial Storage Tanks
FACTORY JACKETED AND
INSULATED STORAGE TANKS
These A. O. Smith storage tanks are designed for storing potable water. Fitting locations
are designed to meet the needs of normal installations plus those
for the A. O. Smith Cer-Temp 80® and Shure -Temp piping methods.
are designed to meet the needs of normal installations plus those
for the A. O. Smith Cer-Temp 80® and Shure -Temp piping methods.
FEATURES
MEETS ASHRAE/IESNA 90.1-2004.
A. O. Smith storage tanks are ideal for use with gas-fired copper heat exchanger equipment
for storage of any potable water at temperatures up to 180°F.
for storage of any potable water at temperatures up to 180°F.
GLASS-LINED TANK - Alkaline borosilicate composition permanently fused to steel by
firing at a temperature of 1600°F, providing years of corrosion protection and
dependable use.
firing at a temperature of 1600°F, providing years of corrosion protection and
dependable use.
HEAVY GAUGE STEEL JACKET - With baked enamel finish.
THREADED OPENINGS - All tanks furnished with threaded openings for thermometer,
relief valve, 2” recirculation lines, tankstat, and drain valve.
relief valve, 2” recirculation lines, tankstat, and drain valve.
5 YEAR WARRANTY
If the tank should leak any time during the first 5 years, under the terms of the warranty,
A. O. Smith will repair or replace the tank. Installation, labor, handling and local delivery are extra.
For complete information, consult the written warranty or contact A. O. Smith.
If the tank should leak any time during the first 5 years, under the terms of the warranty,
A. O. Smith will repair or replace the tank. Installation, labor, handling and local delivery are extra.
For complete information, consult the written warranty or contact A. O. Smith.
TJ-80S, TJ-80A, TJV-120M and TJV-120A
• Fits through 30” door
• Magnesium anode for anti-corrosion protection
• Magnesium anode for anti-corrosion protection
TJ-80A • 80 gallons • exceeds ASHRAE requirements •
saves fuel, helps reduce standby heat loss • 160 psi ASME
standard working pressure.
saves fuel, helps reduce standby heat loss • 160 psi ASME
standard working pressure.
TJV-120A • 119 gallons • exceeds ASHRAE requirements • saves fuel, helps reduce
standby heat loss • 160 psi ASME standard working pressure.
standby heat loss • 160 psi ASME standard working pressure.
TJ-80S • 80 gallons • exceeds ASHRAE requirements • 150 psi working pressure.
TJV-120M • 119 gallons • exceeds ASHRAE requirements
• 150 psi working pressure.
• 150 psi working pressure.
OPTIONS
Perfectly balanced manifold kits (120 gallon models) allow
installation where 240 to 480 gallons of stored water is
required.
installation where 240 to 480 gallons of stored water is
required.
TJV-200-M - 175 GALLONS
• 150 psi ASME working pressure
• 2” foam insulation
• Handhole cleanout (Standard)
• Fits through 33” door
• Storage is downsized to 175 gallons for a 32” x 77” envelope for space restrictive
installations. Model TJV-200 is available with 200 gallons of storage
• Magnesium anodes for extra corrosion protection.
• 2” foam insulation
• Handhole cleanout (Standard)
• Fits through 33” door
• Storage is downsized to 175 gallons for a 32” x 77” envelope for space restrictive
installations. Model TJV-200 is available with 200 gallons of storage
• Magnesium anodes for extra corrosion protection.
MODELS
TJ-80S, TJ-80A
TJV-120A, TJV-120M
& TJV-200M
120 Gallon Model
(FOR SELECT MODELS)