PVI Industries PV 500-6 User Manual

Page of 14
 
 
PV 500-6    09/07 
 
INSTALLATION & MAINTENANCE MANUAL 
 
PVI DURAWATT
®
 ELECTRIC WATER HEATERS 
 
 
Installation and service must be performed by a qualified service installer, service agency or utility supplier. 
 
IMPORTANT: THIS MANUAL CONTAINS INFORMATION REQUIRED FOR INSTALLATION, OPERATION AND 
MAINTENANCE OF THIS EQUIPMENT. READ AND FOLLOW THE INFORMATION IN THIS MANUAL AND ALL 
OTHER PROVIDED INSTRUCTIONS, LABELS AND MARKINGS BEFORE INSTALLING, OPERATING OR 
SERVICING THIS UNIT.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, 
personal injury, exposure to hazardous materials or loss of life. Refer to the information contained in this 
manual. A qualified installer, service agency or the utility supplier, who must read and follow the supplied 
instructions before installing, servicing or removing this appliance, must perform installation and service. 
 
 
WARNING: Do not use this appliance if any part has been under water.  Immediately call a qualified service 
technician to inspect the unit and to replace any part of the control system, and any other items affecting safe 
appliance operation. Failure to follow these instructions can cause property damage, personal injury,  or loss of 
life.
 
 
 
 
TO THE INSTALLER:
  After installation, these instructions must be given to the equipment user or left near the appliance. 
 
SPECIAL INSTRUCTIONS TO THE OWNER:
  Retain this manual for future reference. These instructions contain 
important information that will help you in maintaining and operating this appliance. 
 
 
 
 
 
 
 
CONTENTS 
TOPIC 
                                                                  PAGE 
 
Typical Construction  
Important Safety Notice  
Location and Installation  
Clearances and Electrical Connections  
Start-up Procedures and Operation  
Maintenance  
7  
Replacing Electric Elements  
Cleaning Electric Elements  
Element Continuity Checks  
10 
Contactor to Element Wiring  
11 
Typical Current Measurement  
12 
Bolted Head Removal  
13 
Troubleshooting  
14