PVI Industries 1500 P 250A-TPL Leaflet
Product is patented in the U.S., Canada, and Mexico.
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
PV 6515 02/25/04
(800) 784-8326
• www.pvi.com
LOW NO
x
TURBOPOWER
®
• PACKAGED WATER HEATER
POLYSHIELD
®
POLYMER-LINED STORAGE TANK
TANK SERIES 250 GALLONS VERTICAL
Recovery gph
Dimensions
(inches)
Blower
Motor
MODEL
NUMBER
40° - 120°F 40° - 140°F
INPUT
Btu/h
Min. Inlet
Flow Gas
Pressure
" W.C.
SCAQMD Energy
Model No.
A B C HP Amps
Shipping
Weight
#
1000 P 250A-TPL
1000
800
800,000
4.5
8TPL
800 MBtu/h
33
8
1
1/2
7
1590
1500 P 250A-TPL
1500
1200
1,200,000
4.5
12TPL
1200 MBtu/h 50
8
1-1/4
1
14
1960
Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
With standard gas train
With standard gas train
4" x 42" Channel skids for inputs ≤ 1000 MBtu/h.
4" x 53" Channel skids for inputs > 1000 MBtu/h.
* The information presented is for natural gas 0.6 S.G.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form #PV 6453.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form #PV 6453.
STANDARD GAS PRESSURE REQUIREMENTS:
SEE TABLE FOR MINIMUM PRESSURE BY MODEL.
MAXIMUM STATIC INLET GAS PRESSURE IS 10.5" W.C.
FOR GAS PRESSURES OUTSIDE OF THIS RANGE,
CONTACT YOUR PVI REPRESENTATIVE.
VENTING REQUIREMENTS:
-.02" TO -.06" W.C. (NEGATIVE PRESSURE).
TYPE B VENTING.
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED UPON
THE VENT CONNECTION DIAMETER EXCLUSIVELY. CHECK
NATIONAL FUEL GAS CODE UNDER "FAN ASSISTED."
STANDARD ELECTRICAL REQUIREMENTS:
VOLTAGE:
120V, 1Ø, 60 HZ., 20 AMPS.
OTHER VOLTAGES REQUIRE AN EXTERNAL
STEPDOWN TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN AND
SPECIFICATION WITHOUT NOTICE.