Honeywell SDC User Manual

Operation 

SDC / DHC  

34 EN2H-0220GE51 

R0308 

Individualised switching time programs for heating and hot-water 
operation can be created in this menu. Here, the factory-set 
default programs P1 (and, if enabled, P2 and P3 as well) of each 
heating circuit and the hot-water circuit are overwritten by 
individualised switching times and temperature specifications. 
This is especially advantageous if correspondingly adapted 
heating programs are to be created in case of periodically 
recurring assignments with different assignment times (e.g. shift 
work). Max. three heating cycles, each with a switch-on and 
switch-off time, are available for each day of the week for 
programming switching times. Each heating cycle can also be 
combined with a freely-selectable temperature specification. 

 

The default programs are not lost when overwritten by individually 
created programs. Individualised programs, however, are deleted 
when default programs are reloaded and must be recreated. For 
this reason, individualised switch-on / switch-off times and 
temperature specifications should always be entered in the tables 
provided for this purpose (see 5 Log, pg. 60). 

 

Press 

 button. 

 

Returning to the basic display takes place by pressing the 

 

button or automatically after the set information time (see 
4.1.2.7 "System information" button, pg. 26). 

 

Pos: 29 /156-Honeywell/Bedienung/Auswahl_des_Regelkreises @ 1\mod_1207644837697_6.doc @ 9555