Honeywell CT3200 User Manual
69-0653-6
INSTALLATION
3
Step 1. Prepare for installation
a.
Carefully unpack your new thermostat. Save your receipt and make sure you have the following parts:
b.
Gather the needed tools and supplies listed below.
c.
Make sure that your heating and cooling systems are working properly. If there is a problem with either system, call a
heating/air conditioning contractor—the problem may persist after you install the new thermostat.
heating/air conditioning contractor—the problem may persist after you install the new thermostat.
Required tools and supplies
Optional tools
•
Two AA alkaline batteries. Honeywell recommends Energizer®
batteries.
batteries.
•
Screwdriver
•
Hand or power drill with 3/16-inch or 7/32-inch drill bit
•
Pencil
•
Wire cutter/stripper or sharp knife
•
Level
•
Electrical tape
IMPORTANT: To avoid damaging the compressor in the air conditioner, do not operate the cooling system when the
temperature outdoors is below 50°F (10°C).
temperature outdoors is below 50°F (10°C).
•
Thermostat and mounting plate
•
Labels
•
Screws and anchors
•
Installation and Programming Instructions