Honeywell 7300 User Manual

Place Bar Code Here

62-2020-03

The Honeywell wireless communication card (TB-VWG-APP-1014) 

and related WirelessStatNetwork.jar driver file are designed for use 

with WEBs-AX controllers to integrate Honeywell TB7200, TB7300, 

and TB7600 Series wireless thermostats into a WEBs-AX building 

control system. This card allows the integrator to work in the familiar 

Workbench tool set using any of the TB7200, TB7300, and TB7600 

Series wireless thermostats.

The wireless communication card and TB7200, TB7300, and 

TB7600 Series thermostats use ZigBee

®

 wireless mesh. The 

wireless thermostats are ideal for retrofit applications where the 

addition of communicating field bus wiring in the building space is 

difficult or cost prohibitive. 

This document covers the mounting of the wireless communication 

card in a WEBs-AX controller.

Included in the wireless card package you should find the following items: 

• The wireless communication card

• A local antenna

A #2 phillips screwdriver is required for installation.

To add the Honeywell wireless thermostat network to a WEBs system, you need two .jar files for the WEBStation-AX. 

You can download these files from the Honeywell Buildings Forum at buildingsforum.honeywell.com.

.Jar Files Needed:

• Wireless Thermostat Network Driver: WirelessTstat.jar, version 4.0.4.8 or greater.

• Wireless Thermostat Device and Point Configuration: Wireless TstatDevices.jar, version 4.0.4.8 or greater. 

We recommend downloading the Honeywell Wireless Installation and Integration Reference Guide for the TB7200, 

TB7300, and TB7600 Series Thermostats (Form No. 63-4522) from http://customer.honeywell.com before you begin 

installation.