Emerson 308014EN User Manual
10-11
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
Installation Manual
308014EN, Edition 4
May 2013
May 2013
10.2.5 Mounting the Flange Ball model T30
1
Use a flange which is 6 - 30
mm thick. Make sure that the
diameter of the hole is 96 mm.
Make a small recess at one
side of the flange hole.
mm thick. Make sure that the
diameter of the hole is 96 mm.
Make a small recess at one
side of the flange hole.
2
Put the O-ring on the flange
and insert the Flange Ball into
the flange hole. Make sure that
the pin on the side of the
Flange Ball fits into the corre-
sponding recess on the flange.
and insert the Flange Ball into
the flange hole. Make sure that
the pin on the side of the
Flange Ball fits into the corre-
sponding recess on the flange.
3
Tighten the nut so that the
Flange Ball fits tightly to the
flange (torque 50 Nm).
Flange Ball fits tightly to the
flange (torque 50 Nm).
Recess
10.1.eps
Flange Ball
Nut
10.2.eps
10.3.eps