Emerson W154 Leaflet

Page of 1
Economical, electric storage water heaters  
that fit almost anywhere 
Save space.
Save money.
Model 
W152 / W154 
Submittal Sheet 
Job Specifications
Specifications 
Point-of-Use Water Heaters 
Printed in USA
HWD313-07A-45-02
© 2007 InSinkErator
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.
1-800-558-5712
 x8025, 8030, 8083 
www.insinkerator.com 
Dimensions
• Bronze, long-life storage tank. 
  Nothing to corrode or wear out.
• Screw-in copper heating element can be 
 easily replaced.
• Tank is insulated with expanded polystyrene,  
  then jacketed in steel for maximum heat 
  retention, minimum standby heat loss.
• Super fast recovery rate for better service.
• Drain provided for easy maintenance.
• Easy to install. Fits almost anywhere — 
  under sinks, in cabinets, etc.
• Adjustable temperature range of 
  110° to 170° F.
• Operates on ordinary house current.
• 3-1/2 foot cord and grounded plug.
• One year full warranty covers all parts, 
  labor and onsite repairs by an InSinkErator 
 service agency.*
Tank Construction 
Bronze 
Voltage 
120 volts 
Heating Capacity 
1500 watts 
Element Type 
Replaceable  
Copper/Bronze 
Temperature Range  110°F – 170°F 
Operating Pressure 
150 psi (max.) 
Thermostat Type 
Resettable 
First Hour Rating 
(80°F Rise) 
W152 / 8.6 gallons 
W154 / 10.4 gallons 
Tank Volume 
W152 / 2.5 gallons 
W154 / 4 gallons 
Water Connections  1/2" NPT female 
Pressure  Relief 
Connection 
3/4" NPT female 
Overall Dimensions  W152 
13.5"H 
10.4"D 
10.7"W 
W154 
20.2"H 
10.4"D 
10.7"W 
Sample Specification 
Point-of-use water heater(s) shall be 
InSinkErator 2-1/2 gallon Model W152 or 
4 gallon Model W154 with bronze storage
tank and adjustable temperature from 110°F 
to 170°F.
Warranty:
1-year parts and on-site service. Limited 5-year 
warranty against tank leakage.
* The complete InSinkErator warranty is included in the Care & Use
    booklet packed with each unit. 
10.4"
 
13.5" 
W152 
8.4"
 
Front 
10.7
Back 
T & P VALVE 
(OPTIONAL) 
 
COLD WATER INLET VALVE 
(NOT SUPPLIED) 
10.4" 
20.2" 
W154 
8.4"
 
Front 
10.7" 
Bac
must be InSinkErator compatible copper with bronze base.