Haier 3150 SB User Manual
Service
16
310622L
Service
Repairing the Air Valve
Tool Required
•
Torque wrench
•
Torx (T20) screwdriver or 7 mm (9/32 in.) socket
wrench
wrench
•
Needle-nose pliers
•
O-ring pick
•
Lithium base grease
Disassembly
1.
Relieve the pressure.
2.
With a Torx (T20) screwdriver or 7 mm (9/32 in.)
socket wrench, remove the six screws (103), air
valve cover (102), and gasket (104). See F
socket wrench, remove the six screws (103), air
valve cover (102), and gasket (104). See F
3.
Move the valve carriage (105) to the center position
and pull it out of the cavity. Using a needle-nose pli-
ers, pull the pilot block (116) straight up and out of
the cavity. See F
and pull it out of the cavity. Using a needle-nose pli-
ers, pull the pilot block (116) straight up and out of
the cavity. See F
4.
Pull the two actuator pistons (111). Remove the
u-cups (110) from the pistons. Pull the pilot pins
(114). Remove the o-rings (115) from the pilot pins.
See F
u-cups (110) from the pistons. Pull the pilot pins
(114). Remove the o-rings (115) from the pilot pins.
See F
Air Valve Repair Kit 255122 is available. Refer to
Parts on page 31. Parts included in the kit are
marked with
Parts on page 31. Parts included in the kit are
marked with
◆
symbol. Use all the parts in the kit
for the best results.
F
IG
. 6
102
104
◆
103
TI4682b
F
IG
. 7
F
IG
. 8
TI4616b
116
◆
105
◆
TI4617b
110
◆
111
115
◆
114