BlueAnt Wireless none Owner's Manual

 

 
Important: There are 2 types of Headset Clips included 
                   in this package. Either can be used with full  
                   or open faced helmets, on either side of  
                   the helmet. 
 
 - Headset Clip Mount with Fastening Clamp. 
   (removable) 
 - Headset Clip Mount with Adhesive. (fixed) 

 
                                          Use the one which best suits your helmets design. 
 
 
Using the Headset Clip Mount with Fastening Clamp 
 

1.  Using the provided 

screw driver, loosen 
the Clips’ screws 
enough to allow the 
Clip to slide onto 
either side of the 
Helmets’ shell.  

2.  Make sure you put 

the clip under the helmets padding.  

3.  Adjust the Clip until you find the best location for your helmet.  
4.  Tighten the screws to hold the clip firmly in place. 

 
 
 

 

4

 
 
 
Note: If the helmet’s shell is too 
thick, the Spacer (provided) may 
be needed to put in between the 2 
parts 

 

of the Headset Clip, as 

shown in the picture on the right. 
Use the additional longer screws 
(provided) for this purpose.