Philips CDR820/17 User Manual
Programming track numbers
– A program can be composed of normal audio tracks
from multiple CDs in both changer and recorder deck.
– A program with MP3 tracks can only be composed of
tracks from 1 CD.
– Any track can be stored more than once with a
maximum of 99 tracks.
– If you exceed the maximum of 99 tracks the display
shows Program Full.
1
Load the desired disc(s) in the disc tray(s).
2
Select the first required disc by pressing CD 1, CD 2, CD 3,
or CDR.
or CDR.
3
Press PROGRAM.
➜
PROGRAM
starts blinking and PROGRAM is displayed.
4
Rotate the ¡ EASY JOG ™ control to select the required
tracknumbers on the selected disc and store each track by
pressing YES.
tracknumbers on the selected disc and store each track by
pressing YES.
For normal Audio CD(RW) discs only:
0
If you wish to store all tracks of the selected disc, rotate the
¡ EASY JOG ™ control to select
¡ EASY JOG ™ control to select
All and press YES to
store the complete disc in the memory.
➜
The number of programmed tracks (
STEP
), Prog and
the total program time are displayed.
5
Select and store all required CD’s and/or tracks in the same
way.
way.
7
Press PROGRAM to end programming.
➜
PROGRAM
stays shown and the program is currently
available.
Changing a program
1
If necessary press STOP 9.
2
Press PROGRAM to enter Program mode.
Erasing tracks
3
Select the tracknumbers you wish to erase with 5 or 6
and erase each number by pressing NO.
and erase each number by pressing NO.
➜
Cleared is displayed briefly.
➜
The next programmed track number will move up to this
position and is displayed together with the step number
and the total program time.
position and is displayed together with the step number
and the total program time.
Adding tracks
3
Rotate the ¡ EASY JOG ™ control to select the
tracknumbers you wish to add to the program and store
each track by pressing YES.
tracknumbers you wish to add to the program and store
each track by pressing YES.
➜
The number of programmed tracks (
STEP
), Prog and
the total program time are displayed.
4
Press PROGRAM to end programming.
➜
PROGRAM
stays shown and the program is currently
available.
Clearing a program
1
If necessary press STOP 9.
2
Press NO.
➜
Clear Prog ? is displayed.
3
Press YES to clear the program.
➜
Prog Cleared will be displayed and
PROGRAM
goes
off.
Making a program for recording
If the program is used for recording only tracks from discs
in the changer should be programmed. Also see chapter
“Recording a program”.
in the changer should be programmed. Also see chapter
“Recording a program”.
Programming
19
English
xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 19