Philips CDR770 User Manual

16

This feature enables you to make fast and easy recordings of
a CD. Track increments are automatically detected from the
source material. Track increments cannot be added manually.
In analog source material a silence of 2.7 seconds or more is
automatically detected as a track increment.

Important:
- Recording from CD-changers should always be started in the

RECORD DISC, RECORD TRACK or MAKE CD mode.

1 Make sure the disc is absolutely free of scratches and dust

particles.

2 Press SOURCE repeatedly until (depending on the

connection used):
➜ DIGITAL I, OPTICAL I or ANALOG lights up and

DIGITAL 1, OPTICAL or ANALOG appears on the
display.

3 With the CD recorder stopped, press REC TYPE

once: to select ‘

RECORD DISC’;

twice: to select ‘

RECORD TRACK’;

four times: to select ‘

MAKE CD’. (Active for digital

recordings.)

➜ d and 

start to flash and the display shows the

selection.

• If input label (DIGITAL I) flashes, the digital connection is

incorrect.

1 To start recording, press PLAY on the selected source.

➜ The CD recorder automatically starts to record and d

lights continuously.

• If, however, you start the source during a track, recording

starts at the beginning of the next track or after 2.7 seconds
of silence in analog recordings.

• To check the elapsed recording time, press DISPLAY. (This

can also be done during recording)

• The EASY JOG/ENTER key can be used to adjust the

recording level.

• The recorder stops automatically.

2 To stop recording manually, press STOP on the CD recorder.

➜

UPDATE lights up and 

and d go out.

• If STOP 9 was pressed within 3 seconds after pressing

PLAY, no recording will take place.

• To interrupt recording, press PAUSE on the CD recorder.

➜ d starts to flash. (Autostart recording is disabled.) To

resume, press RECORD on the CD recorder.

After recording the display will show 

UPDATE for several

seconds.

Note:
- Recordings from DAT, DCC or analog sources will only stop

after 20 seconds silence. 

- Auto track is always active.

REM

TRACK

TIME

DIGITAL

OPTICAL
ANALOG

PROG
SHUFFLE
REPEAT
SCAN

I

I

CD

RW

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

REM

TRACK

TIME

DIGITAL

OPTICAL
ANALOG

PROG
SHUFFLE
REPEAT
SCAN

I

I

CD

RW

REM

TOTAL

ALL

TRACK

TIME

STEP

TRACK

AUDIO CD RECORDABLE/REWRIT

ABLE

Recordable

AUDIO CD RECORDABLE/REWRIT

ABLE