Compaq PCD-1 User Manual

C

OMPAQ

 

I

PAQ PCD-1

21

Nothing shows on the display 
when the Power button is 
pressed.

> Make sure the batteries are installed.

> Install fresh batteries.

> Make sure the power adapter is plugged into the proper connection.

The LCD backlight does not 
illuminate when a button is 
pressed.

> The backlight may not be visible in bright light. Check in a dark 

environment.

> Check the Menu setting to make sure the backlight is turned on.

“NO DISC” is displayed on the 
LCD.

> Insert a CD.

> Check to ensure that the CD is properly installed. The CD must be 

snapped all the way down into place with the correct side facing up.

> CD is badly scratched or dirty. Replace or clean the CD.

“Hold is on!” is displayed on the 
LCD.

Displays when attempting to turn on the PCD-1 when the Norm/Hold 
switch on the side of the player is in the Hold position. Slide this switch 
to the Norm position before turning on the PCD-1.

Player turns on then shuts off.

Check to make sure the Norm/Hold switch is in the Norm position 
before turning on the PCD-1.

No sound.

> Make sure the Play/Pause icon on the LCD is solid. A flashing 

elapsed time indicates Pause mode. Press the Play/Pause button.

> Increase the volume level by pressing the Volume Increase button.

> Make sure the headphones are properly attached.

> Look for a song title on the LCD display.

> If the player is in Radio mode, make sure a radio station is tuned in.

No sound in one headphone.

> Make sure the headphone connector is fully inserted into the 

connector on the PCD-1.

> Use another set of headphones (if available).

Remote control does not work.

> Make sure the PCD-1 power is on.

> Install or replace the battery in the remote control.