Rockford Fosgate 125.2 User Manual
7.
Input Sensitivity Controls – The input level controls are preset to
match the output of most source units. They can be adjusted to match
output levels from a variety of source units.
match the output of most source units. They can be adjusted to match
output levels from a variety of source units.
8.
Punch Equalization Controls – The Punch EQ helps correct for
acoustical deficiencies in the listening environment. The Bass control
allows a narrow band adjustment of up to 18dB centered at 45Hz. The
Treble control is a wide band hinged adjustment with a maximum of
12dB at 20kHz. The Punch EQ can be bypassed by turning the
controls to their minimum or counterclockwise position.
acoustical deficiencies in the listening environment. The Bass control
allows a narrow band adjustment of up to 18dB centered at 45Hz. The
Treble control is a wide band hinged adjustment with a maximum of
12dB at 20kHz. The Punch EQ can be bypassed by turning the
controls to their minimum or counterclockwise position.
9.
LED Power Indicator – The LED illuminates when the unit is turned on.
10.
XCard (Internal Crossover) – This built-in crossover card is
configurable for a multitude of operating frequencies. The orientation
of the card in its socket determines the function of high-pass, low-pass,
or full range operation.
configurable for a multitude of operating frequencies. The orientation
of the card in its socket determines the function of high-pass, low-pass,
or full range operation.
– 6 –
HP
LP
HP
LP
FULL
For Bridged Mono Wiring
Connect 4
Ω
mono woofer + to L+ of amplifier
and mono woofer – to R– of amplifier. Amplifier
will operate mono/stereo simultaneously.
ROCKFORD CORPORATION
MADE IN THE USA
®
®
27.5 Watts RMS continuous power per
channel into 4 Ohms with less than 0.08%
Total Harmonic Distortion from 20-20kHz
channel into 4 Ohms with less than 0.08%
Total Harmonic Distortion from 20-20kHz
A M P L I F I E R
Do Not Chassis
Ground Any Speaker.
+
–
L+
R–
Low-Pass
Full Range
High-Pass
10