Rolls VP530 Leaflet
USER GUIDE
VP530
Tube Phono Preamp USB
SPECIFICATIONS
I/ O Connectors:
I/ O Connectors:
RCA, 1/4" TRS Stereo
Input Sensitivity:
30 dB gain @ 1kHz, 47k ohms Input Z
Input Impedance:
50k ohms
Output Impedance:
8 ohms Headphone, 100 ohms RCA
Max Output Level:
>10dB @ 1kHz at at .1% dist.
Equalization:
RIAA +/- 1.5 dB, 20Hz to 20kHz
Rumble
Filter:
20Hz
THD
.02%
@
1KHz
S/N Ratio:
>80 dB unweighted
PWR:
15 DC - 700mA
Size:
6"w x 2.5"h x 5.4"d
Weight:
2
lb
Indicator: 1
Power
LED
Bellari is a division of Rolls Corporation
Salt Lake City, UT
02/08
Salt Lake City, UT
02/08
VERY IMPORTANT NOTES:
Occasionally with certain confi gurations, you may experience
excessive hum or buzz. In this case, try connecting the Ground
connection from your turntable directly to your receiver/ampli-
fi er, thus bypassing the VP530.
excessive hum or buzz. In this case, try connecting the Ground
connection from your turntable directly to your receiver/ampli-
fi er, thus bypassing the VP530.
If you connect the output of the VP530, either the RCA or head-
phone outs, without connecting a turntable to the input - you
will experience noise. The combination of the VP530 and the
turntable (with its RIAA equalization curve) - complete a crucial
circuit for proper operation.
phone outs, without connecting a turntable to the input - you
will experience noise. The combination of the VP530 and the
turntable (with its RIAA equalization curve) - complete a crucial
circuit for proper operation.
FOR WARRANTY INFORMATION SEE OUR WEBSITE WWW.ROLLS.COM