Lyngdorf Audio MkIV User Manual
- 15 -
Front panel operations
The operations of the remote control receiver can be bypassed on the front panel for the
Millennium. Bypassing the remote control is done with a long press on the Analog left
selection key “A”. When the remote is turned off the Lyngdorf Logo blinks twice after a 2
sec. press. If the remote functionality is turned on – the Lyngdorf Logo blinks once.
Millennium. Bypassing the remote control is done with a long press on the Analog left
selection key “A”. When the remote is turned off the Lyngdorf Logo blinks twice after a 2
sec. press. If the remote functionality is turned on – the Lyngdorf Logo blinks once.
Software
Software and documentation, for both PC and Millennium, can be downloaded from our
homepage at
homepage at
http://www.lyngdorf.com
.
The software for PC is:
• Serial Load – used for upgrading the software in Millennium
• AmpCom – used for controlling and setting up Millennium from a PC.
• LYNGDORF DSP – used for making digital filters, crossover and voicing in
• AmpCom – used for controlling and setting up Millennium from a PC.
• LYNGDORF DSP – used for making digital filters, crossover and voicing in
Millennium.
These 3 programs come in a zip file called “PC Pack x.x.zip” where x.x is the version
number. In this file are a “setup.exe” and a text file with a release description.
Software or firmware for Millennium comes in a separate file called “Millennium release
xx.zip” where xx is the version number. In this file are a “releasexx.s19” and a text file with
a release description.