McIntosh MC402 User Manual
19
Packing Instructions
Packing Instructions
Quantity
Part Number
Description
1
034052
Shipping carton top
1
034051
Shipping carton bottom
2
034054
Foam Pad (top and bottom)
2
034186
Foam Pad (front and rear)
2
034187
Foam Pad (sides)
1
034136
Inner carton top
1
034137
Inner carton bottom
1
034188
Foam Pad (inner carton)
1
034008
Bottom pad
1
034226
Shipping skid
4
101212
1/4 - 20x2-1/4 cap screw
4
104058
Flat washer
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Four 1/4 - 20 x 2-1/
2 inch screws and washers must be used to fasten the unit
securely to the bottom pad and shipping skid. This will en-
sure the proper equipment location on the bottom pad. Fail-
ure to do this will result in shipping damage.
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. Four 1/4 - 20 x 2-1/
2 inch screws and washers must be used to fasten the unit
securely to the bottom pad and shipping skid. This will en-
sure the proper equipment location on the bottom pad. Fail-
ure to do this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.