Crown Audio XTi 2000 Leaflet

he XTi Series of Crown

®

 amplifi ers are 

   professional tools designed and built for 
   portable PA applications. The series 

includes three models which are identical 
except for output power: XTi 1000, 2000 and 
4000. All are rugged and lightweight, and offer 
unmatched value in their class.

XTi-Series amplifi ers feature an LCD screen 
with speaker presets for crossover frequen-
cies, EQ, limiting, delay, and a subharmonic 
synthesizer. Other features include a switch-
mode universal power supply, useful function 
indicators, proportional-speed fan-assisted 
cooling, XLR inputs, Speakon

®

 and bind-

ing-post outputs, short-circuit protection and 
more.

With their powerful, reliable performance, 
XTi-Series amps easily handle 2-ohm loads 
and are capable of chest-thumping lows. Plus, 
your investment in an XTi-Series amplifi er is 
backed by Crown’s Three-Year, No-Fault, Fully 
Transferable Warranty.

For more details about the Crown XTi Series, 
contact the Crown Technical Support Group at 
800-342-6939 or 574-294-8200. Also, visit the 
Crown Audio website at www.crownaudio.com.

Output Power: See power charts below.

XTi 1000: 30.5 dB 
XTi 2000: 32.9 dB
XTi 4000: 34.2 dB

Frequency Response: +0/–1 dB from 20 Hz to 
20 kHz at 1 watt into 4 ohms.

Load Impedance: Safe with all types of loads. 
Rated for 2 to 8 ohms in Stereo mode, 4 to 16 
ohms in Bridge-Mono mode. The XTi 1000 A1 
(100V version) is rated for 4 to 8 ohms Stereo, 
8 to 16 ohms Bridge Mono.

Sensitivity: 1.4V

Signal to Noise Ratio (below rated 1 kHz 
power at 8 ohms): 100 dB (A weighted).

Damping Factor: Better than 500 from 20 Hz  
to 400 Hz.

Crosstalk: > 70 dB below rated power, 20 Hz 
to 1 kHz.

Input Stage: Input is electronically balanced 
and employs precision 1% resistors.

Input Impedance (nominal): 20 k ohms, bal-
anced;10 k ohms, unbalanced.

Maximum Input Signal: +22 dBu typical.

AC Line Voltage and Frequency Confi gura-
tions Available: 100V, 120V, 220-240V  
50/60 Hz.   

AC Line Current:
    XTi 1000: 6.5A
    XTi 2000: 6.9A
    XTi 4000: 8.0A
    At Idle: Draws no more than 90 watts.

Operating Temperature: 0° C to 40° C at 95% 
relative humidity (non-condensing). 

Input EQ: 6 parametric fi lters per channel with 
adjustable Q, ±15 dB boost/cut. Also adjustable 
high and low shelving fi lters. This 8-fi lter EQ 
section can be bypassed.

Crossover Filters: Highpass and lowpass per 
channel. Butterworth 6/12/18/24 dB per oc-
tave. Linkwitz-Riley 24/48 dB per octave. Also 
includes ±15 dB bandpass gain and polarity 
control. 

Delay: For signal alignment of driver; 50 mS 
total delay.

Subharmonic Synthesizer: Takes the low-
frequency content of the input signal and 
“synthesizes” a new signal that is the same 
as the input signal but one octave lower. The 
new synthesized signal is then mixed with the 
original signal to create the effect.

Output Limiter: Prevents clipping.

Presets: 20 presets, 19 of which are user-de-
fi nable.

•  Integrated speaker presets with LCD front 

panel display

•  Accurate, uncolored sound with very low 

distortion for the best in music and voice re-
production

•  Advanced protection circuitry guards against: 

shorted outputs, open circuits, DC, mis-
matched loads, general overheating, high-fre-
quency overloads and internal faults

•  Extremely versatile, handling a wide range of 

speaker impedances and outputs

•  Switch-mode universal power supply

•  Speaker presets for crossover frequencies, EQ, 

limiting, and delay

•  All products fi ll 2U rack spaces and weigh under 

19 pounds; weight sets a new standard in light-
weight amps

• Speakon

®

 and binding post outputs, XLR inputs 

and loop-thrus

•  Comprehensive LED status per channel

•  Three-Year, No-Fault, Fully Transferable War-

ranty completely protects your investment and 
guarantees its specifi cations

8 ohm Stereo (per channel) 
 
 
 
 
 

1 kHz  
Power 

4 ohm Bridge-Mono 
 
 

8-ohm Bridge-Mono

2 ohm Stereo (per channel) 
 
 

4 ohm Stereo (per channel) 
 

*With 1% THD.

 

  

 
  With 0.5% THD.

8 ohm Stereo (per channel)

1 kHz  
Power 

4 ohm Bridge-Mono 
 
 

8- ohm Bridge-Mono 
 

2 ohm Stereo (per channel)

4 ohm Stereo (per channel) 
 

*With 1% THD.

 

  With 0.5% THD.

8 ohm Stereo (per channel)

1 kHz 
Power

4 ohm Bridge-Mono

8 ohm Bridge-Mono

4 ohm Stereo (per channel)

*With 1% THD.

 

  With 0.5% THD.

2 ohm Stereo (per channel)

†Not rated for 100V versions.