Extron electronic P/2 DA User Manual

specifications

Gain

  P/2 DA4/6 xi .......................................  0 dB or +3 dB (when input is 0.7 Vp-p, output is 

0.7 V or 1.0 V), switchable

  P/2 DA8/12 Series ............................... Unity

Bandwidth ..............................................350 MHz (-3 dB), fully loaded

Number/signal type ................................  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV 

component video, S-video, composite video

Nominal level .........................................  1.0 Vp-p for Y of component video and S-video, 

and for composite video 

0.7 Vp-p for RGB and for R-Y and B-Y of 

component video 

0.3 Vp-p for C of S-video

Minimum/maximum levels .....................  Analog: 0.3 V to 1.5 Vp-p with no offset at unity 

gain

Impedance ............................................. 75 ohms

Horizontal frequency............................... 15 kHz to 135 kHz

Vertical frequency ................................... 30 Hz to 150 Hz

Return loss .............................................. <-40 dB @ 5 MHz

Input coupling ........................................ DC

Number/signal type ................................  4, 6, 8, or 12 (depending on model) VGA-QXGA 

RGBHV, RGBS, RGsB, RsGsBs, HDTV component 

video, S-video, composite video (follows input 

type)

Connectors ............................................. 4, 6, 8, or 12 female 15-pin HD

Nominal level .........................................  1.0 Vp-p for Y of component video and S-video, 

and for composite video 

0.7 Vp-p for RGB and for R-Y and B-Y of 

component video 

0.3 Vp-p for C of S-video

Minimum/maximum levels ..................... 0.3 V to 1.5 Vp-p (follows input)

Return loss .............................................. <-40 dB @ 5 MHz

DC offset ................................................ ±5 mV with input at 0 offset

Input type ...............................................  RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level 

sync

Output type

  P/2 DA4/6 xi .......................................  RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level 

sync (follows input)

  P/2 DA8/12 Series ...............................  RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level 

sync (follows input) 

Tri-level on Y, R-Y, B-Y channels (component video 

720p, 1080i, 1080p)  

Bi-level on Y channel (for all other component 

video rates)

Input level............................................... 2.0 V to 5.0 Vp-p

Output level

  P/2 DA4/6 xi ....................................... TTL: 5.0 Vp-p, unterminated

  P/2 DA8/12 Series ...............................  0.3 Vp-p for component video (bi-level sync) 

0.6 Vp-p for component video (tri-level sync) 

TTL: 5.0 Vp-p, unterminated for RGBHV, RGBS

Input impedance

  P/2 DA4/6 xi ....................................... 510 ohms

  P/2 DA8/12 Series ............................... 10k ohms or 510 ohms (default), selectable

Output impedance

  P/2 DA4/6 xi ....................................... 50 ohms

  P/2 DA8/12 Series ............................... 50 ohms (default) or 75 ohms, selectable

Max. propagation delay

  P/2 DA4/6 xi ....................................... 60 ns

  P/2 DA8/12 Series ............................... >90 ns

Max. rise/fall time ................................... 2 ns

Polarity ................................................... Positive or negative (follows input)

Gain    ..................................................... Unbal. output: 0 dB; bal. output: +6 dB

Frequency response  ............................... 20 Hz to 20 kHz, ±0.2 dB

THD + Noise  .......................................... 0.03% @ 1 kHz at nominal level

S/N    ...................................................... >90 dB at maximum output (unweighted)

Crosstalk  ................................................ <-45 dB @  1 kHz

Stereo channel separation  ...................... >80 dB @ 1 kHz

Impedance  ............................................ >10k ohms unbalanced, DC coupled

Nominal level ......................................... -10 dBV (316 mVrms)

Maximum level  ......................................  +16 dBu, (unbalanced) at 1% THD+N 

0 dBu = 0.775 Vrms,  0 dBV = 1 Vrms,   

0 dBV  2 dBu

Number/signal type  ...............................  8 or 12 (depending on model) stereo, bal./unbal.

Connectors .............................................  (8) or (12) 3.5 mm captive screw connectors,  

5 pole

Impedance  ............................................ 50 ohms unbal., 100 ohms bal.

Gain error  .............................................. ±0.1 dB channel to channel

Maximum level (Hi-Z)  ............................  >+28 dBu, bal., >+20 dBV unbal. at 1% THD+N

Maximum level (600 ohm)  ....................  >+21 dBm, bal., >+18 dBm unbal. at 1% THD+N

Contact closure mute control ..................   (2) 3.5 mm captive screw connectors, 4 pole and 

(2) 3.5 mm captive screw connectors, 3 pole 

Contact closure pin configurations

P/2 DA8 Series ........................................  A = mute all outputs, 1 = mute output 1,  

2 = mute output 2, 3 = mute output 3, 

8 = mute output 8

P/2 DA12 Series ......................................  A = mute all outputs, 1 = mute output 1,  

2 = mute output 2, 3 = mute output 3, 

12 = mute output 12

Power

  P/2 DA4/6 xi ....................................... 100 VAC to 240 VAC, 50/60 Hz, 12 watts, internal

  P/2 DA8/12 Series ............................... 100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal

Cooling................................................... Convection, no vents

Mounting - Rack mount

  P/2 DA4/6 xi .......................................  Yes, with optional 1U, 9.5" deep rack shelf  

(RSU 129, part #60-190-01; RSB 129, 60-604-01); 

or 1U, 6” deep rack shelf (RSU 126, #60-190-10;  

RSB 126, 60-604-10)  

  P/2 DA8/12 Series ...............................  Yes, with included brackets, MBD 149, part 

#70-077-03

Furniture mount

  P/2 DA4/6 xi .......................................  Yes, with optional under-desk mounting kit, 

part #70-077-01 (MBU 125); or through-desk 

mounting kit, part #70-077-02 (MBD 129)

  P/2 DA8/12 Series ...............................  Yes, with optional under-desk mounting kit  

MBU 149, part #70-222-01

Enclosure dimensions

  P/2 DA4/6 xi .......................................  1.6" H x 8.7" W x 6.0" D (1U high, half rack wide) 

(4.1 cm H x 22.1 cm W x 15.2 cm D)(Depth 

excludes connectors.)

  P/2 DA8/12 Series ...............................  1.7" H x 17.4" W x 8.5" D (1U high, full rack wide) 

(4.3 cm H x 44.2 cm W x 21.6 cm D) (Depth 

excludes connectors.)

Product weight

  P/2 DA4/6 xi ....................................... 2.0 lbs (0.9 kg)

  P/2 DA8/12 Series ............................... 6.0 lbs (2.7 kg)

Shipping weight

  P/2 DA4xi ............................................ 4 lbs (2 kg)

  P/2 DA6xi ............................................ 5 lbs (3 kg)

  P/2 DA8/12 Series ............................... 9 lbs (5 kg)

DIM weight (P/2 DA8/12 Series)

USA/Canada ........................................... 10 lbs (5 kg)

International ........................................... 11 lbs (5 kg)

Listings ................................................... UL, CUL

Compliances ........................................... CE, FCC Class A, VCCI, AS/NZS, ICES

NOTE: All nominal levels are at ±10%.

P/2 DA4xi 

1x4 VGA-QXGA ......................................................  60-246-03

P/2 DA6xi 

1x6 VGA-QXGA ......................................................  60-245-03

P/2 DA8 A 

1x8 VGA-QXGA with Audio .....................................  60-891-01

P/2 DA8 

1x8 VGA-QXGA ......................................................  60-891-02

P/2 DA12 A 

1x12 VGA-QXGA with Audio  ..................................  60-893-01

P/2 DA12  

1x12 VGA-QXGA  ...................................................  60-893-02