AudioSource 8 In-Wall Subwoofer User Manual

A paint shield is included in the AS8SW speaker package. 
Place the paint shield inside the frame to protect the speak-
er. You can now safely paint the speaker frame to match 
your wall surface if you desire.

When painting the grill caution should be taken to ensure 
that paint does not clog or block the perforated openings in 
the grill. This would prevent full operation from the speaker.

Should it ever become necessary to remove the AS8SW 
speaker from the wall, simply remove the grill and turn the 
four mounting screws counter-clockwise until the doglegs 
lock out of position in their resting seat. 

The resistance of the speaker wire in your installation can 
cause your subwoofer to perform at less than an optimum 
quality level. Excess resistance, caused by using an under-
sized speaker wire, can result in loss of detail and defi nition 
in the low frequency region of your audio program, as well as 
a loss of dynamic range. 

To prevent this effect in your installation, we have recom-
mended speaker wire gauges that should not exceed 0.5 
Ohms resistance over the recommended length of wire run.

For the AS8SW subwoofer, we suggest the following mini-
mum speaker wire gauge be used:

50’ or less – 16 Gauge 2-Cond. CL3 
50’ – 150’   – 12 Gauge 2-Cond. CL3 
150’ – 200’ – 10 Gauge 2-Cond. CL3