Samson db300a User Manual

In the following pages of this manual, you will find a detailed explanation of all the dB300a’s functions 

and controls, but if you just want to get started quickly you can follow the steps below.

•   Be sure that the dB300a’s Power switch is set to 

the off position.

•   Turn the LINE and MIC LEVEL controls fully coun-

terclockwise to the off position. 

•   Connect the power cable to an AC socket.

 

•   Using a standard XLR cable, plug a microphone 

into the dB300a’s MIC INPUT. 

•   Switch the dB300a’s Power switch to the ON posi-

tion. 

•   While speaking into the microphone, slowly raise 

the MIC LEVEL control until you have reached the 
desired level.

•   Be sure that the dB300a’s Power switch is set to 

the off position.

•   Turn the LINE and MIC LEVEL controls fully coun-

terclockwise to the off position. 

•  Connect the power cable to an AC socket.

 

•   Using a standard XLR or 1/4 inch cable, connect 

a line level signal from a mixer or keyboard into 

the dB300a’s LINE INPUT. 

•   Switch the dB300a’s Power switch to the ON 

position. 

•   Now, run an audio signal from your mixer (like 

some music from a CD) while slowly raising 

the dB300a’s LINE LEVEL control until you have 

reached the desired level.

IMPORTANT NOTE: Be sure to keep the MIC LEVEL control all the way off if there is no microphone connected.

ENGLISH

6