Philips FW930P2/2 User Manual

27

If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.

• Press AUX to select AUX-CDR mode.

™ "CDR" will be displayed.

• Press AUX again to select the external

mode.
™ "AUX" will be displayed.

Notes:
– There are two AUX modes:

i. the normal AUX mode.
ii.  the CDR mode; where the LINE OUT

of this mini system is muted. You will
not be able to record or listen to the
sound from the LINE OUT.

– You are advised not to listen to and

record from the same source
simultaneously.

– All the sound control features (e.g. DSC,

DBB, etc.) are available for selection.

G

PRESET

▲

▲

STOP•CLEAR

SEARCH • TUNING

PLAY PAUSE

PREV

NEXT

A. R

During playback
• Press and hold à or á until the

desired passage is located.
™ During searching, the sound is

reduced to a low volume.

™ When you release à or á, the

tape continues playing.

Notes:
– During rewinding or fast forwarding of a

tape, it is also possible to select another
source (e.g. CD, TUNER, or AUX).

– Before use, check and tighten slack tape

with a pencil.  Slack tape may get
jammed or may burst in the mechanism.

– C-120 tape is extremely thin and is

easily deformed or damaged.  It is not
recommended for use in this system.

– Store the tapes at room temperature

and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).

.

1 Set the MIC LEVEL control to the

minimum level to prevent acoustic
feedback (e.g. a loud howling sound)
before you connect the microphone.

2 Connect a microphone to the MIC

socket.

3 Press CD, TUNER, TAPE or AUX.
4 Play the selected source.
5 Adjust the volume level with VOLUME

control.

6 Adjust the MIC LEVEL control to the

mixing level that you want.

7 Start singing or talking through the

microphone.

Note:
– Keep the mic away from the speakers to

prevent howling.

MIC 

MIC

LEVEL