Manualsbrain.com
  1. Manuals
  2. Brands
  3. Philips
  4. AW2000
  5. User Manual

Philips AW2000 User Manual

Download
Page of 11
12
13
EN
EN
6 Upgrade 
firmware
To improve the performance of AW2000, 
Philips may offer you new firmware for upgrade
of your AW2000.
Warning
 
•
Always connect your AW2000 to AC power for 
firmware upgrade. Never power off your AW2000
during firmware upgrade.
1 
Make sure that AW2000 is powered on 
and connected to the same Wi-Fi network 
as your smartphone or tablet.
2 
Run Philips AirStudio on your iOS or 
Android smartphone or tablet.
3 
Hold and drag the icon of your device 
towards the speaker to set up Wi-Fi 
connection.
  
4 
Tap Services -> Philips AW2000.
  
5 
Tap Firmware upgrade -> Check Online 
to check for new firmware.
  
6 
If a new firmware is available, tap OK to 
start download and installation of the new 
firmware until completion of the process.
  
Tip
 
•
You can add your favorite stations to the preset list 
as instructed on the app. Then, you can press the 
numeric keys (1-5) on AW2000 directly to tune to the 
corresponding radio station.
Play from an external device
You can also listen to an external audio device 
through the unit.
Connect through the MP3-LINKsocket:
1 
Connect a 3.5mm audio cable (not 
supplied) to:
•  the MP3-LINK socket on the back of 
the unit.
•  the headphone socket on an external 
audio device.
  
MP3 LINK
2 
Press SOURCE or AUX on AW2000 
repeatedly (or tap MP3Link on the home 
screen of the app) to select the 3.5mm 
audio input source.
3 
Use the controls on your audio device to 
control music play.
Connect through the 
OPTICALorCOAXIALsocket:
1 
Connect an optical or coaxial cable (not 
supplied) to:
•  the OPTICAL or COAXIAL socket on 
the back of the unit.
•  the corresponding digital output socket 
on an external audio device.
2 
Press SOURCE or AUX on AW2000 
repeatedly (or tap Digital-In Coaxial or 
Digital-In Optical on the home screen of 
the app) to select the optical or coaxial 
audio input source.
3 
Use the controls on your audio device to 
control music play.
Connect through the AUX IN L/Rsockets:
1 
Connect a pair of RCA audio cables (red/
white; not supplied) to:
•  the AUX IN L/R sockets on the back 
of the unit.
•  the audio output sockets on an 
external audio device.
2 
Press SOURCE or AUX on AW2000 
repeatedly (or tap AUX-IN on the home 
screen of the app) to select the AUX IN 
L/R audio input source.
3 
Use the controls on your audio device to 
control music play.