Shure I3C Leaflet

Page of 2
  I3c 
 Sound Isolating Earphones 
 These sound-isolating earphones 
with VoicePort inline microphone 
connect to both your cell phone 
and portable media player. The 
inline control switch allows you to 
easily transition from listening to 
music to answering phone calls. 
WideBand MicroDrivers deliver an 
extended frequency soundstage 
that you can now enjoy at low 
listening levels, even in noisy 
environments.
  
  INSERTING THE EARPHONES 
 
   WEARING THE EARPHONES 
  CHOOSING AN EARPHONE SLEEVE 
 Your earphones come with a selection of sleeves. Make sure the sleeve you 
use is easy to insert into your ear, fits comfortably, and is easy to remove from 
your ear. 
  Warning:  Do not push the earphone sleeve 
beyond the ear canal opening. 
  Make sure that the sleeve completely covers 
the earphone nozzle.  If any part of the 
nozzle is exposed, the sleeve is not properly 
installed.  
 When using the foam sleeves, compress the sleeve between 
your fingers before inserting it into the ear canal. Hold the 
earphone in place for about ten seconds while the foam 
expands and creates a tight seal. 
 Soft Flex Sleeves 
 In small, medium, and large sizes. Made from pliable rubber. 
 Foam Sleeves 
 Triple-Flange Sleeves (Optional Accessory) 
 If desired, the sleeve nozzle may be shortened. Use sharp 
scissors to carefully trim the nozzle to the desired length.
 Nozzle 
 Wax Removal Loop 
  When cleaning, do not force any object through the earphone nozzle! 
 This will damage the earphone sound filter.  
 ©2005, Shure Incorporated
27EN3210 (Rev. 2)
 Printed in U.S.A.
 Flex Sleeves 
 In small, medium, and large sizes. Made from translucent 
PVC.  
 Over the ear
in front
    INLINE SWITCH CONTROL
  Push and hold to MUTE cell phone microphone
  Volume
  Audio Source:
  cell phone
  media player
  Note: Turn volume control to its lowest setting before switching 
between music and cell phone.  Switching to media during a call 
mutes cell phone.
  CLEANING THE EARPHONE NOZZLE 
 If the nozzle of your earphone is blocked, clean the nozzle using the supplied 
wax removal loop.  
Left
right
 Wear the earphones as illustrated below. 
If the earphone seems to be lacking in low frequency response (bass), check 
the tightness of the seal between the earphone and your ear, or try one of the 
other sleeve options.