Samson A6 User Manual

1. HIGH FREquENCy LEvEL – Four-position

switch used to adjust the high frequency
response (in 3dB increments).

2. vOLuME - Controls the amount of output level.

3. XLR INPuT (A6 AND A8 ONLy) - Balanced,

+4dBu line level input is connected here via
standard XLR (microphone) cable.

4. POWER SWITCH – Main power switch.

Resolv A Series Layout

Rear Panel Layout - A8a

5. vOLTAGE SWITCH – Used to select the

operating voltage.

NOTE: Be sure to check the voltage setting is
correct for your country. Also, be sure to use the
correct fuse type when changing the voltage.

6. AC INLET - Connect the supplied IEC power

cable here.

7. RCA – Used to connect signals from unbalanced,

–10dBV devices.

8. 1/4-INCH PHONE – Balance TRS (Tip, Ring,

Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced +4dBu line level signals.