Diablo Audio JP100 User Manual
16
Hazardous
live AC
live AC
Do not expose the unit to drip-
ping water or moist.
ping water or moist.
Placement:
Do not place your Diablo on top
of any heat producing products,
such as power amplifiers or
DACs. If you place the Diablo
inside any Hi-FI furniture or cab-
inets, there must be a clearance
of a minimum of 10cm (4 inch-
es) above the product and a
minimum of 5cm (2 inches)
along the sides. To allow a flow
of cooling air the back of the
cabinet must be open. If these
guidelines are not observed,
overheating may result.
of any heat producing products,
such as power amplifiers or
DACs. If you place the Diablo
inside any Hi-FI furniture or cab-
inets, there must be a clearance
of a minimum of 10cm (4 inch-
es) above the product and a
minimum of 5cm (2 inches)
along the sides. To allow a flow
of cooling air the back of the
cabinet must be open. If these
guidelines are not observed,
overheating may result.
Mains Switch:
To place your Diablo into stand-
by mode use the main switch.
The switch is located in the bot-
tom on the right side just
beneath the acrylic front panel.
by mode use the main switch.
The switch is located in the bot-
tom on the right side just
beneath the acrylic front panel.
SAFETY
INSTRUCTIONS
INSTRUCTIONS