Emerson 20002158 User Manual

Cable layout

Run conduit to 

sensor

Metal conduit

Wrap the drain wires twice around the shield and cut off 

the excess drain wires.

Micro Motion

cable gland

Pass the wires 

through the gland.

Terminate the drain 

wires inside the 

gland.

Cable glands

Remove the core processor 

cover

Go to the shielding 

procedure

Done

(do not perform the 

shielding procedure)

Gland supplier

User-supplied

cable gland

Lay cable in conduit

Drain wires 
wrapped around 
shield

Gland type

Pass the wires through the gland nut and clamping insert.

Clamping
insert

Gland nut

1. Strip 4-1/2 inch (115 mm) of cable jacket.
2. Remove the clear wrap and filler material.
3. Strip all but 3/4 inch (19 mm) of shielding.

1. Strip 4-1/4 inch (108 mm) of cable jacket.
2. Remove the clear wrap and filler material.
3. Strip all but 1/2 inch (12 mm) of shielding.

NPT

M20

Wiring

23