Jensen VM9215BT User Manual
16
VM9215BT
OPERATING INSTRUCTIONS
Power On / Off
Press the
/SRC button on the front panel or press the POWER/
button on
the remote control to turn the unit on. You can also turn on the unit by pressing
the OPEN button and opening the TFT screen.
Press and hold the
the OPEN button and opening the TFT screen.
Press and hold the
/SRC button on the front panel or press the POWER/
button on the remote control to power off the unit. The monitor is drawn back
into the main compartment.
into the main compartment.
Audible Beep Confi rmation
An audible beep tone confi rms each function selection. The Beep tone can be
disabled through the Setup menu.
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder MUTE button on the front panel or the MUTE button on
the remote control to mute the volume. The mute symbol is displayed on the TFT
screen.
Press the rotary encoder button again to restore the volume. Adjusting the
volume or using any of the audio setup features cancels the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by a mobile phone.
the remote control to mute the volume. The mute symbol is displayed on the TFT
screen.
Press the rotary encoder button again to restore the volume. Adjusting the
volume or using any of the audio setup features cancels the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by a mobile phone.
Playing Source Selection
When the monitor is closed, press the SRC button on the front panel or the SRC
button on the remote control to change between available audio playing sources
in the following order: RADIO, DISC, USB1, USB2, SIRUSXM, BT, NAV, AUX, and
CAMERA. The source is displayed on the LCD screen.
button on the remote control to change between available audio playing sources
in the following order: RADIO, DISC, USB1, USB2, SIRUSXM, BT, NAV, AUX, and
CAMERA. The source is displayed on the LCD screen.