Jensen VM9311 User Manual

14

VM9311

Method 1 – TFT screen open: 

1.

Access the “Clock” setting under the General Setup 
menu.

2.

Press the >> or 

 buttons (14, 22) on the remote 

control or the /\ or V buttons (18, 19) on the joystick to 
move the cursor to the “Hour” or “Min” position. 

3.

Press the |<<, or >>| buttons (17, 19) on the remote 
control or the < or > buttons (16, 17) on the joystick to 
adjust the hour or minutes. 

4.

Press the 

 button (14) on the remote control to confirm 

setup.

Method 2 – TFT screen closed: 

1.

Press and hold the DISP button (5) until the clock 
flashes in the LCD display.

1.

Press the /\ or V buttons (18, 19) on the joystick to move 
the cursor to the “Hour” or “Min” position. 

2.

Press the < or > buttons (16, 17) on the joystick to adjust 
the hour or minutes. 

3.

Press the DISP button (5) on the unit to confirm setup.

To return to the System Setup menu, move to 

, then 

press the >/|| button on the remote control.

The ASP Config Menu allows you to make fine audio 
adjustments.

To access the “ASP CONFIG” Menu, press the direction 
buttons on the joystick (16, 17, 18, 19) or remote control (14, 
17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press 
the >/|| button (18) on the remote control to enter the “ASP 
CONFIG” menu. A menu appears with the option for the first 
item, “Bass Center Freq”, highlighted in light blue.

Adjusting a Feature
1.

Enter the option field for the feature you want to adjust 
by pressing the >/|| button (18) on the remote or by 
pressing the ENTER (joystick) button (20) on the unit. A 
submenu appears in a second row with the selected 
option highlighted in light blue.

2.

Select a new value by pressing the >> or 

 buttons (14, 

22) on the remote control or the /\ or V buttons (18, 19) 
on the joystick.

3.

Confirm your selection by pressing the 

, |<<, or >>| 

buttons (14, 17, 19) on the remote control, or the < or > 
button (16, 17) on the joystick. The new value is 
highlighted in light blue and setup is complete. 

To exit setup mode and resume normal playback, press the 
SYS SETUP button (31) on the remote control or the DISP 
button (5) on the front panel.

Bass Center 
Freq

60Hz

According to the audio source, select 
the Bass Center Frequency to 
achieve the best Bass effect.

80Hz

100Hz

130Hz

150Hz

200Hz

Treble Center 
Freq

10KHz

According to the audio source, select 
the Treble Center Frequency to 
achieve the best Treble effect.

12.5KHz

15KHz

17KHz

Sub Filter

80Hz

Selecting a crossover frequency sets 
a cut-off frequency of the subwoofer's 
LPF (low-pass filter) and the 
“SMALL” speakers' HPF (high-pass 
filter). The Crossover frequency set-
ting has no effect if the subwoofer is 
set to “OFF” and any other speaker is 
set to “LARGE”.

120Hz

160Hz

Sub Phase

0D

Subwoofer output IN phase

180D

Subwoofer output OUT OF phase

Bass Q-Factor

1.0

When the Bass Center Frequency is 
selected, adjusting the Bass Q-Fac-
tor alters the sharpness of the Bass 
output.

1.25

1.5

2.0

Return to previous menu.