Jensen MP7610XMi User Manual
10A
iAUX
Audio Input
iAUX
Audio Input
3.5mm
iAUX-IN
IMPORTANT: Incorrect wiring connections can damage
the unit. Follow the wiring instructions carefully, or have
the installation handled by an experienced technician.
the unit. Follow the wiring instructions carefully, or have
the installation handled by an experienced technician.
CHASSIS GROUND
BATTERY
RCA OUTPUT
Connect to an
optional amplifier.
optional amplifier.
AMP
)
-
(
)
(+
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
Connect the yellow wire to the battery
or 12 volt power source that is always
live. This wire MUST be connected
for the radio to work.
or 12 volt power source that is always
live. This wire MUST be connected
for the radio to work.
AMP
SPEAKERS
Left Front
Right Front
Left Rear
Right Rear
ACCESSORY
Connect the red wire to the
factory Accessory or Ignition wire,
which receives power when the
key is turned on.
POWER ANTENNA/
REMOTE AMP TURN ON LEAD
Positive (+) 12VDC output when the
head unit is turned on. Connect the
blue wire to a motorized antenna or
to an amplifier.
Connect to the factory or aftermarket
antenna lead. (Optional extensions or
adapters may be necessary depending
on the type of vehicle you have).
ANTENNA JACK
SUBWOOFER OUTPUT
®
XM DIRECT TUNER
(sold separately)
®
XM ANTENNA
(sold separately)
CABLES SOLD
SEPARATELY
®
XM DIRECT
CONNECT
CABLE
Need help? For technical assistance, call the Jensen
customer support line at 1-800-323-4815.
®
XM AUDIO
INPUT
INPUT
AUXILIARY
INPUT
MP7610XMi Receiver Quick Start Guide