Jensen CDH4110 User Manual

Page of 18
Thank You!
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s 
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to 
use all the features of your new Jensen receiver for maximum enjoyment.
Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Tuner Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CD Player Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . 13
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CD RECEIVER
MODE
BAND
DISP
MUTE
MONO
SCAN
MOSFET 50
WATTS X 4
AUX IN
/
AS/PS
CDH4110
Remove transport screws
Quite los tornillos transportadores
Enlevez les vis de transport
Remove half sleeve
Quite la media camisa
Enlevez le demi-fourreau
2
1
CD
RECEIVER
MODE
BAND
DISP
MUTE
MONO
SCAN
MOS
FET
50
WA
TTS
X 4
AUX
IN
/
AS/PS
CDH41
10
CDH4110
Owner’s Manual
Preparation
It’s a good idea to read all of the instructions before beginning the installation.
Tools and Supplies
The following tools and supplies are needed to install the radio.
Torx type, flat-head and Phillips screwdrivers
Wire cutters and strippers
Tools to remove existing radio (screwdriver, socket wrench set or other tools)
Electrical  tape
Crimping tool
Volt meter/test light
Crimp connections
18 gauge wire for power connections
16 – 18 gauge speaker wire
Speaker Requirements
Only connect speakers rated in the load impedance of 4 ohms. Speakers with a load 
impedance less than 4 ohms could damage the unit.
Disconnect Battery
Before you begin, always disconnect the battery negative terminal.
Prepare Radio
1.
Remove half sleeve – Press the metal levers on both sides to remove the half-sleeve 
from the radio.
2.
Remove transport screws – Remove screws before inserting a CD.
Audiovox Electronics Corporation
150 Marcus Boulevard
 Hauppauge, NY 11788
1-800-323-4815
www.jensen.com
 © 2004 Audiovox
v.021904
Prepare Radio
Preparar la Radio
Préparer la Radio
®