Jensen JRV210 User Manual

18

No power

The vehicle’s ignition is not 
on

If the power supply is properly 
connected to the vehicle acces-
sory terminal, switch the ignition 
key to “ACC”.

The fuse is blown

Replace the fuse.

Disc cannot be loaded or 
ejected

Presence of CD disc inside 
the player

Remove the disc in the player 
and insert the new one.

Inserting the disc in reverse 
direction

Insert the compact disc with the 
label facing upward.

Compact disc is extremely 
dirty or disc is defective

Clean the disc or try to play a new 
one.

Temperature inside the 
vehicle is too high

Wait until the ambient tempera-
ture returns to normal.

Condensation

Leave the player off for an hour or 
so, then try again.

No sound

Volume is too low

Adjust volume to audible level.

Fader is set incorrectly

Press AUDIO button to access 
menu and adjust Fader settings.

Wiring is not properly con-
nected.

Check wiring connections.

The operation keys do 
not work

The built-in microcomputer 
is not operating properly 
due to noise

Press the RESET button.

Sound skips

The installation angle is 
more than 30 degrees.

Adjust the installation angle to 
less than 30 degrees.

The disc is dirty or defec-
tive.

Clean the disc and try to play 
again or use new disc.

Cannot tune to radio sta-
tion, auto-seek does not 
work

The antenna cable is not 
connected.

Insert the antenna cable firmly.

The signals are too weak.

Select a station manually.

Radio automatically 
switches to WB (Weather 
Band)

This is a normal function. A 
Weather Band warning is 
being received.

If you do not want this to occur, 
set the WB Alert setting to “OFF” 
in the System menu.

Radio automatically turns 
on (ignition on) and tunes 
to WB (Weather Band)

This is a normal function 
when the Alert Pwr feature 
is set to “AUTO” in the sys-
tem menu. A Weather Band 
warning is being received. 

If you do not want this to occur, 
set the Alert Pwr setting to “OFF” 
in the System menu.