JL Audio SB-T-TUNCNSL/10W3 User Manual

STEALTHBOX

TM

Installation of this Stealthbox requires professional installation skills and tools.  Please read this installation guide 
thoroughly before beginning the project.  It will guide you step by step through the installation.  It is absolutely 
vital that the enclosure be properly mounted to the vehicle according to these instructions.  Failure to mount 
the enclosure properly presents two problems:  1) The sub-bass performance will suffer due to the movement 
of the enclosure and 2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden 
deceleration.

Stealthbox SB-T-TUNCNSL/10W3

Stealthbox 2001

Sheet SKU# 011150          Revision 01/23/01

STEP 1:  Remove the console’s front tray to expose the 

front bolts.  Remove the bolts.

STEP 2:  Open the storage area lid and locate the two bolts 

inside the storage area.  Remove the bolts.

STEP 3:  Remove the console from the vehicle.

STEP 4:  With the console out of the vehicle, remove the 

bottom half of the storage area.  The top half will remain 
in place as shown in Picture #2.

STEP 5:  Position the console shell over the Stealthbox.

STEP 6:  Reinstall the front tray into the console.

SB-T-TUNCNSL/10W3

Fits 1999-UP Toyota Tundra with bucket seats/console