Blaupunkt CD73 User Manual

8

➮

Press the 

 button 

2

.

The control panel latch mechanism
opens.

➮

First, pull the control panel straight
off the unit and then out towards
the left. (For further details, read
the safety information in the “Notes
and accessories” chapter)!

●

The unit switches off after the con-
trol panel is removed.

●

All the current settings are saved.

●

Any CD already inserted in the unit
remains there.

Attaching the control panel

➮

Slide the control panel from left to
right into the unit’s guide.

➮

Press the left-hand edge of the
control panel into the unit until it
clicks into place.

●

When attaching the control panel,
make sure you do not press the
display.

If the device was still switched on when
you removed the control panel, it will
automatically switch on again with the
last settings activated when the panel
is replaced.

There are various ways of switching the
unit on/off.

Switching on/off using button 

1

➮

To switch the unit on, press button

1

 until you feel the latch open and

the button pushes out.

The unit switches on.

➮

To switch the unit off, press button

1

 until you feel it click into place.

The unit switches off.

Switching on/off using the
vehicle ignition

If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 

1

, it will

switch on/off simultaneously with the
ignition.

You can switch the unit on even if the
ignition is off.

➮

To do so, press button 

1

 so that

you feel it unlatch and push out.

Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.