Blaupunkt CD72 User Manual

64

Selecting the waveband /
memory bank

This unit can receive programmes
broadcast over the FM frequency range
as well as the MW, LW and SW (short-
wave) ranges. There are four memory
banks for the FM range and one for each
of the MW, LW and SW ranges.

In dynamic radio mode there are up to
five memory banks at your disposal.

Six stations can be stored in each mem-
ory bank.

Selecting the waveband

To select the FM, MW, LW or SW (short-
wave) waveband,

➮

press the TUNER button 

<

 in ra-

dio mode.

The radio functions menu appears in the
display.

➮

Press the softkey 

4

 assigned to

the “BAND” display item.

➮

Press the softkey 

4

 assigned to

the “FM” display item for the FM
waveband.

➮

Press the softkey 

4

 assigned to

the “MW” display item for the MW
waveband.

➮

Press the softkey 

4

 assigned to

the “LW” display item for the LW
waveband.

➮

Press the softkey 

4

 assigned to

the “SW” display item for the SW
waveband.

The main radio menu for the selected
waveband appears.

Selecting the FM memory bank

To  switch between the FM memory
banks FM1, FM2, FM3 and FMT or be-
tween DL1 - DL5,

➮

press the NEXT button 

3

 repeat-

edly until the required memory
bank appears in the display.

The memory banks are accessed in the
following order: FM1, FM2, FM3 and
FMT.

Tuning into a station

There are various ways of tuning into a
station in static radio mode.

Automatic seek tuning

➮

Move the joystick 

7

 down or up.

The unit tunes into the next receivable
station.

Browsing through broadcasting
networks (only FM)

Most RDS stations provide several pro-
grammes. The information on these
“broadcasting networks” is transmitted
with the RDS signal. You can “browse”
through these broadcasting networks
and therefore switch programme sim-
ply and conveniently.

➮

Move the joystick 

7

 left or right.