Blaupunkt MP71 User Manual

29

Instead of the CD-changer, you can connect
an external audio source with line output.
Such sources might be a portable CD player,
a MiniDisc player or an MP3 player.
The AUX input must be switched on in the
menu.
You need an adapter cable to connect an ex-
ternal audio source. You can obtain such a
cable from your Blaupunkt dealer.

Switching the AUX input on and
off

➮

Press the MENU button 

8

.

➮

Press the   button 

7

 as often as is

necessary for “AUX OFF” or “AUX ON”
to appear in the display.

If “AUX ON” is displayed, the input has al-
ready been switched on.

➮

Press the   or   buttons 

7

 in order to

switch AUX on or off.

➮

Press the OK button 

5

 or the MENU

button 

8

 to leave the menu. The set-

tings are then saved.

Note:
If the AUX input is switched on it can be se-
lected with the CDC button 

=

.

You can use the connections provided on your
car radio to connect an external pre-amplifier
and a subwoofer.
We recommend that you use matching prod-
ucts from the Blaupunkt or Velocity ranges.

Switch-on delay for external pre-
amplifiers

To prevent speakers from crackling when you
switch on the player, you can set a switch-on
delay for all amplifiers connected to the Pre-
amp Out connection. The maximum delay is
four seconds.

➮

Press the MENU button 

8

.

➮

Press the   or   button 

7

 as often as

is necessary for “AMP DLAY” to appear
in the display.

➮

Press the   or   buttons 

7

 in order to

adjust the switch-on delay.

“DLAY OFF” means that there is no switch-
on delay, while “DELAY 1” to “DELAY 4” indi-
cate the delay time in seconds.

➮

Press the OK button 

5

 or the MENU

button 

8

 to leave the menu. The set-

tings are then saved.