Alpine CDM-9801 User Manual

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• Mechanism error.

1. Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2. When the error indication remains after ejecting,

press the c button again.
If the error indication still does not turn off after
pressing the c button for a few times, consult your
Alpine dealer.

Note
When the "- - - E" is displayed:
In case that the disc cannot be ejected by pressing the c
button, press the RESET switch (refer to page 4) and
press the c button again.
If not ejecting, consult your Alpine dealer.

• No CD is inserted.

- Insert a CD.

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature

returns to within operation range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does

not eject, consult your Alpine dealer.

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.

• Misconnection or disconnection of CD Changer.

- Check connection between CD Changer and control

unit.

Tuning Range

87.7 – 107.9 MHz

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

Capture Ratio

2.0 dB

Tuning Range

530 – 1,710 kHz

Sensitivity (IEC Standard)

22.5 µV/27 dB

Frequency Response

5 – 20,000 Hz (±1 dB)

Wow & Flutter (% WRMS)

Bleow measurable limits

Total Harmonic Distortion

0.008% (at 1 kHz)

Dynamic Range

95 dB (at 1 kHz)

Signal-to-Noise Ratio

105 dB

Channel Separation

85 dB (at 1 kHz)

Wave length

795 nm

Laser power

CLASS I

Power Requirement

14.4 V DC
 (11–16 V allowable)

Maximum Power Output

50 W 

× 4 (CDM-9803 only)

45 W 

× 4 (CDM-9801 only)

Maximum Pre-Output Voltage 2 V/10 k ohms
Bass

±14 dB at 60 Hz

Treble

±14 dB at 10 kHz

Weight

1.5 kg (3 lbs. 5 oz)

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6-1/4")

Width

170 mm (6–3/4")

Height

46 mm (1-13/16")

Depth

20 mm (11/16")

Due to continuous product improvement, specifications and