Electro-Voice EVU-2062/95 User Manual

EVU-2062/95

Dual 6.5” Two-Way

90° x 50° Full-Range

Loudspeaker System

General Description:

Technical Specifications:

Key Features:

1.3” (33 mm) diaphragm, 1.4” (36 mm) exit pure

•

titanium compression driver
Dual 6.5” (165 mm) LF transducers

•

Advanced third-order crossover network with

•

HF protection
Coverage pattern: 90° x 50° Constant

•

Directivity

rotatable waveguide

94 dB sensitivity, 125 dB maximum SPL

•

System rating: 300 W continuous, 1200 W peak

•

Universal U-bracket included

•

70.7/100-V transformer accessory optional

•

NL4 cover plate accessory optional

•

(6) M8 threaded suspension points

•

The Electro-Voice EVU-2062/95 is a compact two-way loudspeaker

system that can be used in a variety of applications where high qual-

ity sound reinforcement is required in an ultra-compact lightweight

enclosure. The enclosure design utilizes asymmetric angles to

maintain tight clearances to wall and ceilings while providing optimal

coverage patterns making it ideal to blend into surroundings. This

design was optimized for wall, stage lip and under balcony applica-

tions.

The EVU-2062/95 incorporates the ICT-1-8, a high-output 1.3” dia-

phragm titanium compression driver coupled to a Constant Direc-

tivity™ 90° x 50° rotatable waveguide. The ICT-6.5-16 woofer was

developed using FEA optimization to provide the highest sensitivity

while achieving the highest level of speech intelligibility. The cross-

over design uses 18-dB-per-octave slopes with equalization for very

smooth response in the vocal range, linear off-axis response and a

protection circuit for long term reliability.

The EVU series is constructed of 9-ply hardwood plywood enclo-

sures with six integral M8 suspension points to support a wide va-

riety of mounting positions. The EVU system is finished in textured

paint, available in either white or black. Each EVU system includes

a universal U-bracket to facilitate mounting. The U-bracket provides

full unobstructed rotation of the loudspeaker (330° unobstructed ro-

tation if the transformer kit is installed). Additional mounting points

are located on the rear of the enclosure for use with an Omnimount™

type bracket. An available 70.7/100-V transformer kit may be easily

mounted over the input panel for use in distributed systems. All of

these features give you the flexibility to address a large range of

venues, while quickly and precisely supporting customer require-

ments.

Freq. Response

(-3 dB): 100 Hz - 16 kHz

Freq. Range

(-10 dB): 70 Hz - 20 kHz

Rotatable Coverage: 90° x 50°

Rec. High-Pass Frequency: 90 Hz

Passive Crossover Freq.: 2400 Hz

Axial Sensitivity

: 94 dB (1 W/1 m)

Max. Calculated SPL

: 125 dB

Passive Power Handling

: 300 W continuous, 1200 W peak

Impedance: 8 ohms (nominal), 6.0 ohms (min.)

LF Transducers: Dual ICT-6.5-16, 6.5” (165mm) drivers

HF Transducer: ICT-1-8, 1.3” (33mm) diaphragm

compression driver

Connectors: Single four-pin 12 AWG Phoenix/Euro

Block screw-terminals

Enclosure: 9-ply hardwood plywood with

textured paint

Grille: 18 GA steel with cloth

Environmental: IEC 60529

Suspension: (6) M8 threaded suspension points

Dimensions

(H x W x D):

8.21” x 20.98” x 8.14”

(208.4 mm x 532.9 mm x 206.7 mm)

Net Weight: 25.0 lb (11.3 kg)

Shipping Weight: 31.2 lb (14.2 kg)

Half-space measurement.

EIA RS-426A, tested for eight hours.