JL Audio SB-CAN-PODS1-M770 User Manual

I n s t a l l a t I o n G u I d e

for the

SLPK-CAN-SPYDER1

sKu#94491& 94490

Thank you for choosing a JL Audio Slampak

for your motorcycle sound system. With proper

installation, your new vehicle-specific enclosed sound system will deliver years of listening pleasure.

We strongly recommend that you have your new Slampak

installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox

be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

s t e P 1
Empty out the front storage space of the motorcycle so that
you have a clean area to work in.

If you are only installing the pods, skip to steP 16.

Continued on Next Page

s t e P 2
Remove the bottom panel above the rear tire as show here

s t e P 3
Lift the seat, remove the panel that simulates a gas tank at
the top center of the motorcycle. Remove the two panels
labelled “can-am” (one on each side of the motorcycle) and
the two panels labelled “spyder” (one on each side of the
motorcycle).

SLPK-CAN-SPYDER1_INSTR_SKU# 011312

InstallatIon

d I F F I C u lt Y :

out

estImated tIme:

1 HouR

SlamPak