Philips 47PFL4606H User Manual
16
• [Colour enhancement]: Make colours
more vivid and improve the details
in bright colours. You can switch this
feature on or off.
• [Gamma]: For selected models. Adjust
the midtone intensity in the picture.
Black and white are not affected.
• [PC mode]: Adjust the picture when a PC
is connected to the TV via HDMI or DVI.
• [Light sensor]: Adjust settings dynamically
based on the current lighting conditions.
• [Picture format]: Change the picture
format.
• [Screen edges]: Adjust the viewing area.
(when set to maximum, you may see noise
or the rough edge of an image).
• [Picture shift]: If available, adjust the picture
position for all picture formats except for
[Auto zoom] and [Wide screen].
Change picture format
1
Press ADJUST.
2
Select
[Picture format], then press OK.
3
Select a picture format, then press OK.
Summary of picture formats
The following picture settings can be configured.
Note
•
Depending on the format of the picture source, some
picture settings are not available.
Manually adjust picture settings
1
Press .
2
Select
[Setup] > [TV settings] > [Picture],
then press OK.
3
Select one of the following settings, then
press OK.
• [Smart picture]: Access predefined smart
picture settings.
• [Reset]: Reset to factory default settings.
• [Contrast]: Adjust the intensity of backlight
areas, while the video contents are kept
unchanged.
• [Brightness]: Adjust the intensity and
details of dark areas.
• [Colour]: Adjust colour saturation.
• [Hue]: Compensate for colour variations.
• [Sharpness]: Adjust sharpness in the image.
• [Noise reduction]: Filter and reduce noise
in an image.
• [Tint]: Adjust the colour balance in an
image.
• [Custom tint]: Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
• [Digital Crystal Clear] / [Pixel Plus] /
[Pixel Plus HD]: Fine-tune each pixel to
match surrounding pixels. This setting
produces a brilliant, high-definition image.
• [HD Natural Motion]: For selected
models. Minimise juddering effects and
enhance picture smoothness.
• [100Hz Clear LCD] / [120Hz Clear
LCD]: For selected models. Reduce
motion blurring and make picture
clearer.
• [Advance sharpness]: Enable superior
picture sharpness.
• [Dynamic contrast]: Enhance contrast.
[Medium] setting is recommended.
• [Dynamic backlight]: Adjust brightness
of the TV backlight to match lighting
conditions.
• [MPEG artifact reduction]: Smooth
out transitions on digital pictures. You
can switch this feature on or off.
EN
[Auto format]: For
selected models. (Not for
PC mode.) Automatically
display the suitable picture
format. If not, widescreen is
applied.
[Auto fill]: For selected
models. Adjust the
picture to fill the screen
(subtitles remain visible).
Recommended for minimal
screen distortion but not
for HD or PC.