Dayton Audio DTA-100a Leaflet

User Manual

www.daytonaudio.com

100 Watt Class T

Digital Audio Amplifier

DTA-10a

Specifications:

Power Output:

50 watts RMS x 2 into 8 ohm

Total Harmonic Distortion:

<0.01% @30W

<5.0% @50W

Minimum Speaker Impedance:

6 ohm

Signal-to-Noise Ratio:

103 dB, A weighted

Input Impedance:

2 k ohm ±5%

Frequency Response:

20-20,000 Hz

Channel Separation:

95 dB

Efficiency:

85%

Dynamic Range:

>100 dB

Electrical Requirement:

24VDC @ 5A center pin positive

Dimensions:

2" H x 3.375" W x 5.625" D

Weight:

1.0 lbs

Package Contents:

• DTA-100a 100W Digital Class T Amplifier
• World compatible 24V@5A switch mode power supply
• 2 sets of screw-type banana plugs for speaker connection
• 3.5mm to ¼" headphone adapter
• 3.5mm to 2 RCA “Y” cable
• 6" coiled 3.5mm audio input cable

Warranty

The Dayton Audio DTA-100a is warranted free from defects in material

and workmanship for one year from date of purchase. Warranty does

not apply to misuse, abuse, neglect, accident, improper use, etc.

Note: If an inappropriate power supply or 4 Ohm speakers are used

and the unit is damaged, the warranty will be voided.

Important Safety Instructions

To reduce the risk of electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified
personnel. To reduce the risk of fire and shock do not expose unit to rain or moisture. The unit should be connected to
an earth grounded AC electrical socket. The unit should be operated in a well ventilated area. Minimum clearance is 2
inches from the ventilation openings.

Model: DTA-100a

Note: Operating this unit with a 4 Ohm load may result in

damage to the amplifier and void the warranty.