GE DR-1200 User Manual

Rugged Dome Installation Manual 

Mounting the Unit 

 

 

1038346B / February 2003 

13 

To install the housing on pendant-mount, extended-pendant-mount, or 
wall-mount brackets, perform the following. 

Note: The extended-pendant-mount bracket is extended with a piece of installer-provided 
3/4-inch (1.9 cm) pipe that has standard NPT threads. The extension should be in the 
bracket before performing the installation procedure.

  

Note: Feed the cables through the mounting surface, bracket, and housing at the 
appropriate time depending on whether you are using the flying lead and whether the cable 
is external or internal to the mounting surface. 

To prepare the mounting surface perform the following. 

1)  Using the bracket surface as a template, mark the mounting holes 

on the mounting surface. 

2)  Drill the mounting holes and a pass-through hole for the camera 

cables. 

3)  Secure the bracket to the mounting surface with the provided 

screws and anchors. 

To install the housing into the bracket see Figure 10 and perform the 
following. 

 

Pendant or wall-mount 

bracket 

 

 

 

Mounting screws (3) 

(through housing base)