Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Screen reference 

1008

Trunk Group 

Your switch stores and displays 15 characters of name and number information 
associated with an incoming call on analog trunks (ICLID, or incoming call line 
identification information). This field appears for CO, DID, and DIOD trunk 
groups when the Analog Trunk Incoming Call ID field on the System-Parameters 
Customer-Options screen is 

 and the Direction field is 

 or 

.

This field appears only when the Incoming Dial Type field is 

. Digits received 

through Automatic Number Identification (ANI) are printed on a CDR record, 
passed to the Intuity AUDIX and ASAI interfaces, and displayed on the phone 
(and on tandem calls if the outgoing trunk requires ANI). Then the digits are sent 
to the outgoing trunk.

For Access, APLT, CO, DIOD, FX, tandem, tie, and WATS trunk groups only.

This field appears when the Group Type field is 

.

 

Used to collect ICLID information in the U.S.

 

Used to collect ICLID information in Japan.

Stops the collection of ICLID information on analog trunks.

 

If 555-3800 calls extension 81120, the trunk group receives 
*55538000*81120*. The phone displays Call from 555-3800.

If 555-3800 calls extension 81120, the trunk group receives 
55538000*81120*. The phone displays Call from 555-3800.

1 to 4 digit 
number 

May be used as the first digit

Enter 

 to allow overlap sending to a Central Office.