Lucent Technologies 8.2 User Manual
Command reference
1041
18
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
18
Command reference
Use the commands in the tables below to access each administration screen.
Brackets [ ] indicate the qualifier is optional. Single quotes (‘ ’) indicate the text
inside the quote must be entered exactly as shown or an abbreviated form of the
word may be entered. MAX is the maximum number available in your system
configuration.
inside the quote must be entered exactly as shown or an abbreviated form of the
word may be entered. MAX is the maximum number available in your system
configuration.
AAR and ARS Digit Analysis Table
Action
Object
Qualifier
change
aar analysis
ars analysis
ars analysis
Enter digits between 0 to 9, ‘x’ or ‘X’ (dialed
string) [‘part’ 1-8] [‘min’(1-MAX)]
string) [‘part’ 1-8] [‘min’(1-MAX)]
display
aar analysis
ars analysis
ars analysis
Enter digits between 0 to 9, ‘x’ or ‘X’ (dialed
string) [‘part’ 1-8] [‘min’ (1-MAX)] [’print’ or
’schedule’]
string) [‘part’ 1-8] [‘min’ (1-MAX)] [’print’ or
’schedule’]
list
aar analysis
ars analysis
ars analysis
[‘start’ string] [‘count’ 1-MAX]
[‘route’(1-MAX or r1-r32)], [‘part’ (1-8)],
[‘node’ (1-MAX)], [‘to-node’ (1-MAX),
[‘print’ or ’schedule’]
[‘route’(1-MAX or r1-r32)], [‘part’ (1-8)],
[‘node’ (1-MAX)], [‘to-node’ (1-MAX),
[‘print’ or ’schedule’]
list
aar route-chosen
ars route-chosen
ars route-chosen
Enter dialed number, [‘partition’ (1-8)], [’print’
or ’schedule’]
or ’schedule’]