Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Features and technical reference 

1311

Restriction — Controlled 

■

Trunk-to-Trunk Transfer

When a multifunction telephone (BRI/Digital/Hybrid) dials sufficient 
digits to route a call, but could route differently if additional digits were 
dialed, the telephone does not recognize the Conference or Transfer 
buttons. The user must delay dialing for 3 seconds or dial # to indicate that 
the call can be routed based on the digits already dialed. The Conference or 
Transfer buttons are then recognized and the switch completes the call.

■

VDN in a Coverage Path

Calls in an established conference will not cover to a VDN.

Once a call covers to a VDN, a conference cannot be established until the 
call is delivered to an extension and vector processing ends.

Refer to the 

‘‘Feature-Related System Parameters’’ on page 632

 screen for the 

following conference-related fields:

Public Network Trunks on Conference Call

Conference Parties With Public Network Trunks

Conference Parties Without Public Network Trunks

Conference Tone

Abort Conference Upon Hang-Up

—

Controlled Restrictions allow a telephone user with console permission to activate 
or deactivate specific restrictions.

Use Controlled Restriction to administer the following restrictions:

■

Outward — The telephone cannot place calls to the public network.

■

Total — The telephone cannot place or receive calls. (Allowed calls include 
calls to a remote-access extension, terminating-trunk transmission tests, 
and Emergency Access to Attendant calls.)

Direct Inward Dialing (DID) calls are routed to the attendant or a recorded 
announcement. All other calls receive intercept tone.