Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Managing displays 

110

Displaying ICLID Information 

Let’s set up tie trunk group 10 to receive calling party information and display the 
calling party number on the phone of the person called. 

These instructions are for collecting ANI in the U.S. Refer to 

‘‘Automatic 

Number Identification’’ on page 1165

 for information on ANI 

administration outside the U.S.

1. Type 

.

The 

Trunk Group

 screen for trunk group 10 appears.

2. Type 

 in the Incoming Dial Type field.

3. Press 

NEXT PAGE

 and type 

 in the Incoming Tone (DTMF) ANI 

field.

4. Press 

ENTER

 to save your changes.

Your switch collects the calling party name and number (Incoming Call Line 
Identification, or ICLID) received from the central office (CO) on analog trunks.

 TRUNK GROUP

 Group Number: 10_

Group Type: tie_____

CDR Reports: r

   Group Name: Node1 to Node3

_______ COR: 10

TN: ___

TAC: *10__

    Direction: two-way

Outgoing Display? n

Trunk Signaling Type: ____

  Dial Access? n

Busy Threshold: 99_         Night Service: _____

 Queue Length: ___                                   Incoming Destination: 2000_
    Comm Type: voice

Auth Code? n

Trunk Flash? n

BCC: _

ITC? ____

 TRUNK PARAMETERS
    Trunk Type (in/out): auto/auto-incorrect Incoming Rotary Timeout(sec): 5
     Outgoing Dial Type: _________                  Incoming Dial Type: tone
                                               Disconnect Timing(msec): 500
        Digit Treatment: __________                             Digits: ____
                                                     Sig Bit Inversion: none

Incoming Dial Tone? y

Disconnect Supervision - In? y

Out? n

  Answer Supervision Timeout: 0__           Receive Answer Supervision? y