Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Setting up telecommuting 

293

Setting up call forwarding 

In our example, we assign the feature access codes and class of service to set up 
call forwarding. This allows your users to forward their calls to another extension.

To set up call forwarding:

1. Type 

 and press 

RETURN

.

The 

Feature Access Code

 screen appears.

2. Set a 2-digit access code for the following fields and press 

ENTER

.

a. Type 

 in the Extended Call Fwd Activate Busy D/A field.

b. Type 

 in the Extended Call Fwd Activate All field.

c. Type 

 in the Extended Call Fwd Activate Deactivation field.

This sets the access codes for these features. The Command prompt 
appears.

3. Type 

 and press 

RETURN

.

The 

Class of Service

 screen appears.

4. Set the following fields to 

.

■

Extended Forwarding All

■

Extended Forwarding B/DA

This allows you to change the forwarding of all your calls from an off-site 
location.

5. Set the Restrict Call Fwd-Off Net field to 

 and press 

ENTER

.

This allows your users to forward calls off-site.

■

Bridged Appearance

When the pound key (#) is pressed from a bridged appearance immediately 
following any of this feature’s four FACs, the system assumes that the 
currently active bridged extension will be administered. The station 
security code of the currently active bridged extension must be entered 
after the initial # to successfully complete the command sequence.

If the station has only bridged appearances, the station’s extension must be 
dialed after the FAC to successfully complete the command sequence, 
since the station’s extension is not associated with any appearances.