Lucent Technologies 8.2 User Manual

Page of 1707
DEFINITY ECS Release 8.2
Administrator’s Guide  
555-233-506  
Issue 1
April 2000
Enhancing system security 
314
Adding logins and passwords 
11
16. Lucent recommends you administer the following on all voice mail ports:
Assign all voice mail ports a unique Class of Restriction. Refer to 
‘‘Class of Restriction’’ on page 520
 for more information.
If you are not using outcalling, fax attendant, or networking, 
administer the unique Class of Restriction where the FRL is 
0
, the 
Calling Party Restriction field is 
outward
, and all unique trunk 
group Class of Restriction on the Calling Permissions are 
n
. Refer to 
‘‘Class of Restriction’’ on page 520
 for more information.
NOTE:
Lucent recommends you administer as many layers of security as 
possible. You can implement steps 
9
 and 
16
 as a double layer of 
security. In the event that the voice mail becomes unsecured for any 
reason, the layer of security on the switch takes over, and vice versa.
17. Administer all fax machines, modems, and answering machines analog 
voice ports as follows:
Set the Switchhook Flash field to 
n
.
Set the Distinctive Audible Alert field to 
n
. Refer to 
‘‘Station’’ on 
page 882
 for more information.
18. Install a Call Accounting System to maintain call records. In the CDR 
System Parameters screen, Record Outgoing Calls Only field, set to 
y
Refer to 
‘‘CDR System Parameters’’ on page 508
 for more information.
NOTE:
Call Accounting Systems produce reports of call records. It detects 
phones that are being hacked by recording the extension number, date 
and time of the call, and what digits were dialed.
Adding logins and passwords
This section shows you how to add a user and their password. To add a login, you 
must be a superuser with authority to administer permissions.
When adding logins, remember the following:
Type the new login name as part of the 
add
 command. The name must be 
3–6 alphanumeric characters in length, and can contain the characters 0-9, 
a-z, A-Z.
The password must be from 7 to 11 alphanumeric characters in length and 
contain at least 1 non-alphabetic character.